My solar reading is higher or lower than it should be

This may be due to the voltage setting.

The Senseable Transmitter has an adjustable voltage setting.  You can use this to fine-tune the readings being generated.

 

To adjust the voltage setting, do the following:

  • Push the tuning button on the transmitter for approx 6 seconds until the LED flashes
  • Release the button
  • Put the display into tuning mode 
  • Once the transmitter is paired with the display and the display is showing "240" or similar, push the tuning button on the front of the transmitter.  The display will now show "250" or similar.  This is the voltage setting.  Your options are 200, 210, 22, 230, 240, 250 and 260.
  • Once you have reached the required setting, wait a minute and the transmitter and display will revert to normal readings.
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk