EnviR - How many tariffs can be set per day, and can it vary by day?

A Peak Tariff and an Off-Peak Tariff can be set on the EnviR if required. 

These tariffs cannot be varied by day or channel.

Adjusting your electricity price

The EnviR display has been programmed with a default p/kWh unit rate. If you wish to
change the unit rate please follow these steps:

• Push and hold the UP () button on the EnviR display until the LED flashes then release.
• Push the UP () or DOWN () button to change from pounds/pence to euros/cents.
• Press the OK button to confirm.
• The price will then start flashing (i.e. c/p/kWh). Push the UP () or DOWN () button to
adjust the pence/cents price of the electricity.
• Press the OK button to confirm.
• Repeat this process with the pence/cents option.
• Press the OK button to confirm and the ENVI display will resume normal operation.

Setting an additional rate

There are several electricity tariffs available, if you pay different kWh unit rates for electricity consumed, the EnviR display can be set up as follows.
• Press and hold the UP ( ) and DOWN () buttons together until the LED flashes and release.
• Using the UP ( ) and DOWN () buttons you can now select your low rate unit cost.
• Press the OK button to confirm when the correct price has been set – if you don’t change
the cost, you will not see the time section.
• You will then see the clock flashing. Using the UP () and DOWN () buttons you can now
set the time that your low rate starts. Press the OK button to confirm when the time has been set.
• Using the UP () and DOWN () buttons you can set the time your normal rate starts.
Press the OK button to confirm when the time has been set.
• Using the UP () and DOWN () buttons you can now select your normal rate unit cost.
• Press the OK button to confirm and resume normal operation.

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk